Advantage:

l   very low friction and will not seize after long period of unuse when installed in a hydraulic system   

l   chemical resistant   

l   wide operating temperature range   

l   wide operating pressure from vacuum up to 200bar   

l   operating speed up to 10 m/s   

l   can be used to seal gases   

l   can replace O-rings

Material:
Jacket Material: Pure PTFE, PTFE Carbon, PTFE Graphite, PTFE Bronze or PTFE Glass. Also available in PEEK, UHMW, ETFE.
Metal Spring Material: SS301; SS316; Elgiloy; C276.
Applications:

Typical applications of Spring-energized PTFE Seals are in oil and gasvalve, defense and aerospace, low temperature application, medical equipment,and sealing systems that demand extreme chemical resistant. We can alsospecially design it to be used for sterilization, clean-rooms and ultra-high vacuum purposes.

Types:

Spring Energized PTFE Seals for both rod and piston applications

		Standard canted coil spring-energized PTFE Seals and a corrosion resistant coil spring installed. It is good for static, reciprocating and rotary seals applications. PTFE Seals TC1S can operate up to 200 bar while PTFE Seals TC1T, with its extended base, can operate up to 500bar.
		A single-acting seal consisting of a PTFE U-profiled seal and a corrosion resistant V-spring. It is good for static, reciprocating and rotary seals application. PTFE Seals TC2S can operate up to 200 bar while PTFE Seals TC2T, with its extended base, can operate up to 500bar.
		A single-acting seal consisting of a PTFE U-profiled seal, a corrosion resistant V-spring, and sharped lip profile. This type of PTFE seal is good forstatic, reciprocating and rotary seals applications and also for applications with abrasive medias present. PTFE Seals TC3S can operate up to 200 bar while PTFE Seals TC3S, with its extended base, can operate up to 500 bar
		A single-acting seal consisting of a PTFE U-profiled seal, a corrosion resistant V-spring and around lip. It is good for static, reciprocating and rotary seals application. PTFE Seals TC4S can operate up to 200 bar while PTFE Seals TC4T, with its extended base, can operate up to 500bar.

Spring Energized PTFE Seals with lips facing inside to seal internal pressure

		Static, dynamic and low pressure seals applications with internal pressure. Canted coil spring-energized PTFE Seal TCI1S can operate up to 500 bar while PTFE Seal TCI1T, with its extended base, can operate up to 1200bar.
		Static and dynamic seals applications with internal pressure. V-spring energized PTFE Seal TCI2S can operate up to 500 bar while PTFE Seal TCI2T, with its extended base, can operate up to 1200bar.
		Static and dynamic seals applications with abrasive particles and with internal pressure. V-spring energized PTFE Seal TCI3S can operate up to 500 bar while PTFE Seal TCI3T, with its extended base, can operate up to 1200bar.
		Static and dynamic seals applications with internal pressure. V-spring energized PTFE Seal TCI4S can operate up to 500 bar while PTFE Seal TCI4T, with its extended base, can operate up to 1200bar.

Spring Energized PTFE Seals with lips facing outside to seal external pressure

		Static, dynamic and low pressure seals applications with external pressure. Canted coil spring-energized PTFE Seal TCO1S can operate up to 500 bar while PTFE Seal TCO1T, with its extended base, can operate up to 1200bar.
		Static and dynamic seals applications with external pressure. V-spring energized PTFE Seal TCO2S can operate up to 500 bar while PTFE Seal TCO2T, with its extended base, can operate up to 1200bar.
		Static and dynamic seals applications with abrasive particles and with external pressure. V-spring energized PTFE Seal TCO3S can operate up to 500 bar while PTFE Seal TCO3T, with its extended base, can operate up to 1200bar.
		Static and dynamic seals applications with external pressure. V-spring energized PTFE Seal TCO4S can operate up to 500 bar while PTFE Seal TCO4T, with its extended base, can operate up to 1200bar.